Service area
Hire a Licensed Electrician in Sarasota, Florida
Does your Sarasota home or business need a panel replacement or a wiring repair? Describe it on the phone, and we'll set a time for a licensed electrician.
- Line answered
- 24/7
- Electrician
- Licensed
- Price
- Quoted first
- ZIP prefixes
- 342
Electrical work in Sarasota
Panels, breakers and loose connections make up most electrical calls in Sarasota: a breaker that won't hold, an outlet that runs warm, lights that dip when the AC starts. Tell Hire Local Electrician what the house is doing, and we'll get a licensed electrician out to find the cause.
About 50% of homes here were built between 1950 and 1979, so original panels, breakers that have tripped for decades and, in some houses, aluminum branch circuits are what an electrician tends to find.
Summer into early fall is the peak, when daily thunderstorms and the height of hurricane season overlap. Air conditioning runs hard from April to October, so overloaded circuits keep coming the whole time. Panel replacement and new circuits normally need a permit and an inspection in Sarasota, while replacing an outlet or a switch on an existing circuit often does not.
For a house from 1976, the usual work is an electrical panel upgrade, electrical repair on loose or aluminum connections, and circuit breaker repair when a breaker trips or won't reset.
When to call urgently
- A burning smell near outlets, switches or the panel
- Visible sparking, arcing or scorch marks
- A shock from an appliance, switch, faucet or fixture
- Water reaching outlets, the panel or wiring
- A breaker that will not stay reset, or a panel that is hot to the touch
Local conditions
What goes wrong with wiring in Sarasota homes?
Which of these applies to your house depends mostly on when it was built and what has been added since. If you know the year, tell us when you call.
Aluminum branch wiring from the 1960s and 1970s
Aluminum branch circuits were common in houses wired from about 1965 to 1973. Aluminum works loose at outlets and switches, so warm cover plates and flickering lights are the warning signs, and the fix is a connector rated for aluminum at every device.
Panels at the end of their working life
Plenty of panels put in during the 1960s and 1970s are still in service, and some brands from that period are known for breakers that fail to trip on a fault. Replacing one is a planned safety job, not an emergency, and it's the most common big upgrade in houses this age.
What else comes up in Florida
Lightning strikes and surges that take out the panel, the air conditioning controls and a few appliances at once, sometimes with a burning smell and no obvious source.
ZIP codes
Which ZIP codes do you cover here?
Every Sarasota ZIP code we cover is listed here. Type your ZIP into the checker to be sure. Don't see your ZIP? Call anyway and we'll check your address.
- 34230
- 34231
- 34232
- 34233
- 34234
- 34235
- 34236
- 34237
- 34238
- 34239
- 34240
- 34241
- 34242
- 34243
- 34249
- 34260
- 34276
- 34277
- 34278
Available in Sarasota
Which electrical service do you need?
Do Sarasota homes have aluminum wiring?
Some do, mostly houses wired from about 1965 to 1973. It doesn't usually mean a rewire: a licensed electrician can join a short copper lead to the aluminum at each outlet, switch and splice, using connectors rated for it.
What does electrical work cost in Sarasota?
It depends on the job. In houses from the 1970s the bigger jobs are a panel replacement and fixing aluminum connections, priced on the panel size and how many outlets and switches are involved. A single repair costs far less. You'll know the price first, and you only pay for work you agreed to.
Can I get an electrician in Sarasota at night or on a weekend?
Yes, for anything urgent. Our line is answered 24 hours a day. Tell us what's happening and we'll get a licensed electrician out who takes after-hours calls. Nights and weekends usually cost more than a weekday visit.
Talk to us
Need an electrician in Sarasota?
Tell us what the outlets, lights or breakers are doing. We'll get a licensed electrician out to check the panel and the connections.
We'll get a licensed electrician out to you, and you only pay for work you agreed to.